Contents | Search

• User Manual hyperDENT® Compact NEW V9.4.4
  • Preamble
  • Bugfixes in hyperDENT® Compact NEW V9.4.4
  • Bugfixes in hyperDENT® Compact NEW V9.4.3
  • Design changes in hyperDENT® Compact NEW V9.4.2
  • Bugfixes in hyperDENT® Compact NEW V9.4.2
  • Bugfixes in hyperDENT® Compact NEW V9.4.1
  • What´s new in hyperDENT® Compact NEW V9.4.0
  • Introduction
    • General Information
      • CAD Settings
    • General Operation Instructions
    • Key Shortcuts
    • User Interface
      • Toolbars zoom and view
  • Installation
    • License Center
    • Software – Updates
  • Workflow Quick Guide 
    • Load Parts
    • Suggest blank
    • Set and check
    • Calculate
    • Workflow Demo
    • Setting
      • Set Machine Parameters
      • Fixture properties
      • Blank administration settings
        • Automatic naming parameters
        • Forced user input
      • Milling strategies default
      • Create Blank
        • Blank types
        • Geometries
        • Materials
        • Color schemes
      • Create Profile Support Elements
      • Automatic Tilting
  • Workflow
    • Load Part 
      • 
        Prepare
    • 
      Blank Administration
      • Blank manager
      • Open file
      • New blank
      •  Save remaining blank
      • Load Existing Blanks Without Project File
    • Machine and Fixture
    • 
      Set and check
      • Part Information and Messages
      • General preparation for the calculation
      • Edit Part Properties and Support Elements
        • Overview of functions
        • Moving Parts
        • View
        • Tilt Part in Blank
        • Nesting Parts in a Blank
        • Adjust Part on Screwchannel Axis
        • Prepare
          • Part Type
          • Additional Properties
          • Main direction
          • Set buccal direction
          • Occlusal Direction
          • Margin Lines
            • User-Defined Areas
          • Pontics
          • Implant Interface
            • Detect Angled Screw Channels
            • Edit Screw Channel
            • Set Machining Areas at the Implant Interface
            • Set Corners for Inner Geometries
            • Thread
          • Holes
          • Feature Curves
            • Set Feature Curves
            •  Full Upper Denture
            • Full Lower Denture
            • Bridges and Models
        • Set occlusal insertion direction
        • User-Defined Areas
        • Undercut areas
        • Tags
        •  Set Connectors
        •  Setting Sintering Frames
          • Example without base
          • Example reduced height
          • Example reduced height and base
          • Example support plate and additional connectors on base profile
          • Example height limit with sintering pins
        •  Setting Sintering Pins
        • Template Editor Lite
        • Rotate Blank
        • Kategorie Mapping
      • Milling Strategies
        • Editing the Template (Optional)
          • Open the Processing Template via the Part Browser or Context Menu
          • Open a Template via the Main Menu
          • Protected Machining Templates – Password, License
          • Edit Job List
          • Edit Parameters
          • Template variants
        • General Settings – Template
        • Overview of 3D Cycles
        • Overview of 4D Cycles
        • Overview of 5X Cycles
        • Overview of Cycles for Connector Machining
        • Overview of Drilling Cycles
        • General Job Parameters
          • Example: Conditional Calculation
          • Example Boundary Check
        • Cycle-Specific Job Parameters
          • Reducing the Blank on Cavity and Occlusal Side
          • Roughing on Cavity, Occlusal, or any Side
          • Finishing/Fine Finishing the Margin Line
          • Finishing/Fine Finishing Inside the Coping Areas
            • Coping-Specific Tilting with Undercut Machining for 3+1 Machines
            • 5X Boss Finishing/4X Boss Finishing
            • 5X Peeling
          • Finishing within the Margin Line for Bridges with Inlay/Onlay Parts or Maryland Bridges
          • Rest Machining
            • 3D Arbitrary Stock Roughing
            • Automatisches Restmaterial im 3X- und 5X-Modus bei Restmaterial­bearbeitung in Kappen
          • Finishing Cavity Side/Finishing Occlusal Side
            • For all Cycles
            • For 3D Equidistant Finishing and 3D Equidistant Finishing Flow for Occlusal Side with Bridges
            • For 3D equidistant finishing
            • For all 5X Cycles Without Undercut Machining Option
            • For all 5X Profile Finishing Cycles with Undercut Machining Option
            • For all Cycles Machining Occlusal Side
            • Overall Finishing Occlusal Side (Bridge)
            • For all Cycles Machining Cavity Side
            • For 3D Complete Finishing
            • For 3D profile finishing pocket mode (bridges cavity side), 5X profile finishing pocket mode (bridges cavity side)
          • Finishing any Side
          • Roughing, Finishing with Grinding (Optional)
            • For 3X Peeling, Roughing of any Side
          • Fissurenbearbeitung
          • Cutting, Reducing, Breaking Connectors
            • Cut/Reduce Connectors
            • Breaking Connectors
          • Cut Sintering Frame
          • Roughing Sintering frame
          • Plane Finishing Sintering pins and -frame
          • Machining Splints
          • Drilling Inside Copings
          • Processing User-Defined Areas
          • Concave Molding
          • Full Denture
          • Engraving
          • Ecken von Implantatanschlüssen bearbeiten
      • Direct Setting and Checking of Part Properties and Support Elements
        • Margin lines
        • Screw channels
        • Holes
        • Feature curves
        • Pontics
        • Connectors
        • Sinterpins
        • Sintering frame
        • Tags
    • Calculating Toolpaths
  • Reference Part
    • Icons
    • Main Menu
      • General Settings
        • Miscellaneous
        • Project Management
        • Part Tracking
        • Prepare
        • Consistency Checks
        • Calculation
        • Postprocessing
        • Navigation
        • Display
      • Import Database Objects
      • Machining...
        • Machine
        • Reset Machine Properties
        • Fixtures
          • Creating a New Fixture
      • Blank Types...
        • Create/Edit Blank Type 
        • Create/Edit Geometry
        • Create/Edit Material
        • Create/Edit Color Scheme
      • Blank administration settings
      • Support Elements...
      • Milling strategies default
      • Parts...
      • Part Identification
      • Print Project Page Setup
      • hyperVIEW
        • Creating a New Machine
      • LicenseCenter
    • Machine Connect
  • Glossar
  • Contact