|
Create, delete, copy connector types, and edit the settings for the selected connector type.
|
To better meet the different requirements of the part types, you can create part type-specific connector profiles.
|
Select and edit the basic profile to add a profile. Add by clicking the “+” button.
|
|
Select the part type.
|
|
Create part type-specific connector profiles.
|
|
Type
|
Select the part type.
|
Shape type
|
Circle
Ellipse
Oval
|
Angle
|
Taper angle of the connector: Cylinder = 0
|
Diameter
|
Diameter at the part.
|
Height
|
For elliptical and oval connectors.
|
Width
|
For elliptical and oval connectors.
|
Wall thickness
|
0.1 mm
Wall thickness of the screw channel connector.
The diameter of the connector on the part is: Diameter of the prefabricated screw channel + 2x wall thickness.
|
Distance to margin line
|
Distance to the boundary line.
If the safety clearance is too small, the crown edge may be damaged.
|
Ignore equator
|
Normally, the connectors are placed on the equator of the part. This switch causes the connectors to be bound to the margin line, which means that the "Distance to
margin line" setting determines the position of the connectors.
 Ignore equator No  Ignore equator Yes |
Group size
|
Number of connectors for a crown that are automatically set.
|
Connectors at pontic position
|
Also set the connector at the pontic.
|
Milling cut
|
Connectors that are automatically cut at the end of the machining.
Manually set individual connectors with cut or assign cut at a later stage. The job must be saved in the template.
|
Cut depth
|
Percentage value for the cut:
|
0%, None
|
No cut.
|
100%, Full
|
Complete cut; the connector is completely cut.
|
Cut safety distance
|
Distance of the cut to the part. If the distance is too small, this may damage the part.
|
Connector below emergence profile
|
|
Connectors at pontic position
|
For bridges
|
Arrangement strategy
|
|
Connector count
Group size outer
Group size inner
|
Only for full lower jaw dentures
Only for full lower jaw dentures
|
Distance between connectors
|
|
|
|
|
Support Elements...
