Only for fully anatomical crowns and bridges.
|
Cycles
|
3D automatic restmachining
3D arbitrary stock roughing
|
The cycle “3D arbitrary stock roughing” at the end of a job list, can result in the calculation time being significantly extended due to the blank tracking.
|
Once the occlusal side has been fine finished, it may be necessary to rework the fissures using a finer tool.
|
Diameter referenced tool
|
Enter the diameter of the tool from the job that has just been completed.
Since the cycle has no blank tracking, the theoretical rest machining only refers to the referenced tool.
|
Max. angle for red. feedrate
|
|
Value 0
|
Full feedrate; with a different value, the feedrate is reduced during plunge movements.
|
|
|
