Example reduced height and base

 Anfang  Zurück  Weiter

 

Example reduced height and base

set-and-check-frame-2,5-9.1

Wall

Result

Thickness

Wall thickness/thickness of the sintering frame.

set-and-check-frame-3-9.1

Reduced height

The height of the sinter frame can be reduced to the highest and lowest connector.


Center offset

Use this function to move the height-reduced portion of the frame orthogonal to the blank. Independent of this, the rule applies here as well: Upper and lower limits of the reduction are determined by the highest and lowest connector.  

Base

Thickness

Wall thickness/thickness of base.

Extended width

The sinter frame is extended at both ends by the set value .







 

 



Graphic

The graphic below the parameters always shows only the currently activated options.