Using the appropriate template parameters, you can push the inner area out of the frame using light pressure.
|
Cycles
|
3D freepath milling
The cut follows the outline (from the perspective of the machining direction).
|
Side
|
Side for machining.
Occlusal side/cavity side/both sides
|
Remaining material height inner frame
|
0.1 ... 0.05 mm
Remaining material thickness after the cut, so that the inner portion (1) of the frame can be pressed out.
|
Remaining material height base connectors
|
mm
Material thickness for the stabilization of the Sintering frame. Also applies to the additional connectors on the Sintering frame base.
|
Max. distance add. base connectors
|
mm
The additional connectors at the Sintering frame base are automatically generated at intervals defined by this value. The cross section corresponds in height and width to the value of Remaining material height base connectors.
|
