Overview of Cycles for Connector Machining

Cut/reduce connectors

Cut connectors completely or partially.

Cut (reduce) connectors partially.

Cut according to the shape of the outline.

Cut parallel to the outline.

Cut without residue.

Reductions and cuts are also possible from the cavity side.

Cuts are made from the outside working inward.

Additional cut on cavity side

Make the cut from the cavity side.

Break connectors

Break parts completely out of the blank.

Requires reducing the connectors.

Using a special tool, the part is broken out of the blank by applying pressure on the occlusal side.

Cut sinter frame

Cut sinter frames completely or partially.

Roughing sinter frame

Finishing of the inner area of sinter frames when a support plate is used.

Roughing of sinter frames reduced in height.

Plane Finishing sinterpins and -frame

Sintering frames and sintering pins with reduced height can be finished with this cycle.