Example reduced height

 Anfang  Zurück  Weiter

 

Example reduced height

set-and-check-frame-1-9.1

Wall

Result

Thickness

Wall thickness/thickness of the sintering frame.

set-and-check-frame-2-9.1

Reduced height

The height of the sinter frame can be reduced to the highest and lowest connector.



Center offset

Use this function to move the height-reduced portion of the frame orthogonal to the blank. Independent of this, the rule applies here as well: Upper and lower limits of the reduction are determined by the highest and lowest connector.    

Base

Extended width

The sinter frame is extended at both ends by the set value.









 


 

Graphic

The graphic below the parameters always shows only the currently activated options.