|
Consistency Checks
|
|
|
Message highlighting
|
If active, the info button flashes in Set and Check 
|
|
Set connector highlighting
|
If active, the Set Connectors button flashes as long as not all parts nested in the blank are set with connectors.
|
|
Safety distance to part
|
If the distance between two parts is smaller than the set value, an error message is displayed.
|
|
Security distance to fixture
|
If the distance between part and fixture is less than the set value, an error message is displayed.
|
|
Part outside blank
|
The part is outside the blank. Tilt or move part or use another blank.
|
|
Part outside fixture boundary
|
The part is outside the fixture boundary. Move part.
|
|
Parts overlap
|
At least two parts overlap. Move part.
|
|
Millboundary outside blank
|
No problem if the fixture is open.
|
|
Milling boundary outside fixture boundary
|
|
|
Connectors exist
|
Check if connector is present.
|
|
Connector ends outside blank
|
Move connector and/or part into the blank.
|
|
Millboundary cuts other parts connector
|
Set traverses or move the part.
|
|
Screw channel outlet opening ends outside blank
|
|
|
Millboundary cuts other parts screwchannel outlet opening
|
|
|
Check mesh for additive manufacturing
|
|
