The toolpaths indicate the milling movements that the machining device must perform to mill the part, i.e. the dental restoration, from the raw material.

The toolpaths are created based on settings made in previous process steps and templates.

The icon is active if at least one part is selected for which all process steps have been completed. You can also select several parts, and the function will work for all selected parts.

Click the icon to start the calculation.

Once the calculation has started, the selected parts are barred from further machining – see the icon in the part browser.

A message in the message window indicates that the calculation is completed. The part is locked and is shown in the blank in gray or as an outline. The area in the blank is therefore considered to have been machined.

Depending on the selected settings, once the calculation has finished, hyperVIEW is started, the NC file is created, and the toolpaths are displayed.

Pause

Pause the calculation.

Stop

Cancel the calculation.

Resume

Resume the paused calculation.

The display screen shows the sequence of the calculations along with any error messages, if any, and the progress bar indicating the job and the progress of the calculation as a percentage.