Icons

Icons - Werkzeugleiste

	Top view	View according to alignment for the machining of the occlusal side.
	Bottom view	View according to alignment for the machining of the cavity side.
	Front view	View from the front. The main machining direction serves as the starting point.
	Back view	View from the back. The main machining direction serves as the starting point.
	Left view	View from the left. The main machining direction serves as the starting point.
	Right view	View from the right. The main machining direction serves as the starting point.
	Back left view
	Back right view
	Front left view
	Front right view
	Zoom all	Center blank or non-hidden parts on the workspace.
	Draw and zoom to window	Set zoom area and center on the workspace.
	Zoom selected	Center selected part on the workspace.
	Hide selected	Hide selected part.
	Hide all except selected	Show selected part, hide the rest.
	Show all	Show all parts.
	Show undercut areas	The undercuts are viewed and displayed from the main machining direction and, if set, from the occlusal insertion direction.
	Hide/Show part information elements

Note: The respective view refers to the selected part and may differ from the main view of the holder for multiple holders that have opposite slots.

Icons – Main menu

	Main menu
	Switch to fullscreen	Switch between fullscreen and window mode.
	General settings	Opens the general settings.
	Help	Opens the hyperDENT help/manual.
	Print project	Print current project. Displays project information.
	Export project document	Export current project as PDF. Displays project information.
	hyperVIEW®	Opens hyperVIEW (toolpath simulation program)
	License center	Function for license management and activation.
	Execute command	Select command from the selection menu and apply it to the activated part.
	> Save part	Saves the part in hyperDENT format including part properties as hdpart or hdpartz file.
	> Export part	The selected part is split into STL and BND files and exported.
	> Delete part transformations	Delete part transformations so that the alignment of the coordinate system is adjusted to hyperDENT.
	> Delete part nesting transformations	Rotations and displacements of the part are deleted and reset to the initial situation.
	> Refresh licensing	Review and update the license for changes. E.g., to activate new options or a different maintenance period.
	> Log settings	Settings for automatic logging => Caution: This has a dramatic effect on the calculation time! Only after consultation with FOLLOW-ME!
	> Set scale correction from part
	> Save copy of project	Saves the project in hyperDENT format including part properties as hdproj or hdprojz file.
	> Save copy of blank	Saves the selected blank in hyperDENT format including part properties as a hdproj or hdprojz file.

Icons – Project management

	New project	Create a new project. If a project is open, it is closed beforehand.
	Open project	Select and open an existing, previously saved project; the currently opened project is closed.
	Save project	Current project is saved and can be reopened later via the Open project dialog.
	Close hyperDENT	The current instance is closed.

Icons – Process steps

	Load part	Information about current workflow status if highlighted orange
	Load blank	Information about current workflow status if highlighted orange
	Edit	Information about current workflow status if highlighted orange
	Calculate	Information about current workflow status if highlighted orange

General icons

	Delete/Close
	Pause		Calculation paused...
	Resume		Resume calculation
	Stop		Stop/Cancel calculation
	Reset		Filter settings are deleted and reset to default values.
	Delete		Set filter settings are deleted.
	Filter sorting top/down, bottom/up; open/close dropdown menu
	Filter sorting top/down, bottom/up; open/close dropdown menu
	List		Display in list form
	Image list		Display in list form with preview image
	Icons		Display as preview images

Touchscreen mode