Example: Conditional Calculation

Example 1:

Arbitrary stock roughing with successive job using a longer tool.

1) Job	Roughing cavity side
	Parameter setting
Calculate if	= Off ...
Max. groove depth	= 5 (for a shorter tool)

2) Job	Roughing cavity side
	Parameter setting
Calculate if	= groove depth bigger
Groove depth	= value from top of blank
Depth value	= 5 (for a longer tool) ...
Max. groove depth	= unlimited

For a groove depth < 5 mm, only the first job is calculated; for a groove depth > 5 mm, both toolpaths are calculated.

Example 2:

Optional finishing in which the finishing job is automatically generated with the correct tool (short/long), depending on the depth value (e.g., 5) and the position of the
Z-level boundary area.

1) Job	Overall finishing occlusal side, optional for coping depth < 5:
	Parameter setting:
Calculate if	= groove depth smaller
Groove depth	= value from top of blank
Depth value	= 5
	...
Max. groove depth	= unlimited
2) Job	Overall finishing occlusal side, optional for coping depth > 5:
	Parameter setting:
Calculate if	= groove depth bigger
Groove depth	= value from top of blank
Depth value	= 5
Max. groove depth	= unlimited (limitation possible if required).

If the maximum required groove depth from the blank surface to the deepest point is smaller than 5 mm, then Job 1 is calculated with the shorter tool; otherwise, Job 2 is calculated with the longer tool.