The machining of holes allows you to implement drill holes of any kind:
 

•Through holes and blind holes with a diameter

•Through holes and blind holes with a diameter and thread

•Through holes and blind holes with two diameters, angled

•Through holes and blind holes with two diameters, angled and threaded

Thread for occlusal retention element

Hole for lateral latch

The definition and parameterization of holes essentially corresponds to the
screw channel procedure.

 
Holes must be generated manually via three points at the trailing or bottom edge (blind hole). For detailed information on the process, see Manually define the screw channel

To use threads in holes, follow the instructions provided in the Thread section.

Holes can be categorized just like screw channels. This allows for the differentiated machining
of holes with different properties.
The machining operations corresponding to the categories must be stored in the template.