Example height limit with sintering pins
|
|
|
|
|
|
|
Result
|
Wall
|
|
Top boundary off
|
Thickness
|
Wall thickness/thickness of the sintering frame.
|
|
Reduced height
|
The height of the sinter frame can be reduced to the highest and lowest connector.
|
Top boundary
|
Align top to part boundary.
|
Top offset
|
This function is only available if the height limitation is active. The upper part limit is increased by the set value.
|
Base
|
|
|
|
|
Top boundary on
|
Extended width
|
The sinter frame is extended at both ends by the set value.
|
|
|
|
|
|
|
|
Graphic
|
The graphic below the parameters always shows only the currently activated options.
|
|
|
|
Grafik
|
Die Grafik unterhalb der Parameter zeigt immer nur die momentan aktivierten Optionen an.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
