for Macintosh

Locations of the Power Rating and Serial Number Labels

Product name GS-24
Drive system Digital control servo motor
Cutting mechanism Media-moving method
Acceptable material widths 50 to 700 mm(1-15/16 to 27- 9/16 in.)
Cutting area Maximum 584 (W) × 25000 (L) mm (22-1/1 (W) × 984-1/4 (L) in.)
Usable tools Roland CAMM-1 series blade
Maximum cutting speed 500 mm/s (all directions)
Cutting speed 10 to 500 mm/s (all directions)
Blade force setting range 30 to 350 gf
Mechanical resolution 0.0125 mm/step (0.000492 in./step)
Software resolution 0.025 mm/step (0.000984 in./step)
Distance accuracy (*1) Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater
Repetition accuracy (*1) (*2) ± 0.1 mm or less
Alignment accuracy for printing and cutting when printed material is loaded (*1) (*3) ±1 mm or less for movement distance of 210 mm or less in material-feed direction and movement distance of 170 mm or less in width direction (Does not take influence of printer and material into account)
Connectivity USB 2.0 (FULL SPEED compliant)
Replot memory 2 MB
Command system CAMM-GL III
Power supply

Dedicated AC adapter
Input: AC100 V - 240 V ± 10%, 50/60 Hz 1.7 A
Output: DC24 V 2.8 A

Power Approx. 30 W
Acoustic noise level During operation 70 dB (A) or below (As per ISO 7779)
During standby 40 dB (A) or below (As per ISO 7779)
Dimensions 860 (W) × 319 (D) × 235 (H) mm (33-7/8 (W) × 12-9/16(D)× 9-1/4(H) in.)
Weight 13.5 kg (30 lb.)
Packaging dimensions 975 (W) × 450 (D) × 390 (H) mm (38-3/8 (W) × 17-11/16 (D)× 15-3/8 (H) in.)
Packaging weight 18 kg (40 lb.)
Environmental Temperature: 5 to 40°C (64 to 77°F), humidity: 35 to 80% RH (non-condensing)
Accessories AC adapter, power cord, blade, blade holder, roller base, tweezers, alignment tool, USB cable, setup guide

*1 According to material and cutting conditions as specified by Roland DG Corporation. (Using separately available stand PNS-24)

*2 • Excluding expansion/contraction of the material.
• Length in material feed direction: less than 1600 mm.

*3 According to measurement standards as specified by Roland DG Corporation.
• Software must be included Roland DG Corporation software.
• Assumes use of a laser or inkjet printer with a resolution of 720 dpi or greater.
• Excludes glossy and/or laminated material.
• Excludes effects of warped printing due to accuracy of printer or effects of expansion/contraction of material.
• May not be read correctly by the sensor depending on the printer ink (black) used.

Locations of the Power Rating and Serial Number Labels

Serial Number

This is required when you seek maintenance, servicing, or support. Never peel off the label.

Power Rating

Use an electrical outlet that meets the requirements for voltage, frequency, and amperage given on the label.