for Macintosh

Referring to the Menu Flow Chart as you proceed will help you complete the setting procedure smoothly.

Procedure

  1. Press to select 4-POINT START.

    If using 3 crop marks, select 3-POINT START. The screen below is displayed.

  2. Press .

    The screen below is displayed.

     

  3. Press .

  4. Perform steps 3 to 12 in "Cutting in Tool Mode (2)."

  1. When the figure below is displayed, send data from the computer.

    When the machine receives the data, it starts cutting.

  2. Remove the cut material.

    Remove the material to complete the cutting procedure.