Loading Roll Material (2)

Procedure

1. Press the power button.
   • The Machine Doesn't Run

     

   The screen below is displayed.
   

   

   Set SELECT SHEET to EDGE

   If SELECT SHEET is set to EDGE and the material is loaded, the area from the top edge of the material to 25 mm is reserved for the margin.

   

2. Press .

   The cutting carriage moves to the left edge. The cuttable width and length then appear on the display.

   

3. After operation stops, check that the material has not come loose.
   • If the material comes loose

• Loading Roll Material (3) (Material Feeding)