All the data received from the setup condition to release condition are saved.

The data is not cleared even when the setup condition is released.

If the setup condition is released once and set to setup condition again, the data that was saved is overwritten with the new data if data is sent from the computer.

All the data are cleared when the power is turned off.

If the data stored in the buffer exceeds 800 KB, recutting cannot be performed until the data is cleared once.
If REPLOT is carried out in this condition, DATA OVERFLOW appears.
If no data is in the buffer, NO DATA appears when REPLOT is selected on the menu.


Preparing the Data for Recutting

Performing Recutting