1. This setting lets you set the speed for moving the blade to the next cutting position with the blade lifted off the material during cutting operation. If set to AUTO, the blade moves at the speed specified by SPEED. If UPSPEED is increased, the cutting time is shortened. When cutting material that is thinner or thicker than the standard material, it may be better to decrease the speed such as to prevent the material from being lifted up.

    Setting method: "Setting the Cutting Conditions"

  2. (UPSPEED)

    Stored in Memory: Yes
    Factory Default: AUTO
    Setting Range: 10 to 50 cm/s (10 cm/s steps), AUTO

     

Back Next