When to Use Tool Mode


    ■ When it is not possible to perform alignment in Sensor Mode
    ■ When printing and cutting without selecting the type of material

    It is not possible to use Tool Mode when using only 3 crop marks.

    Required Items
    Alignment tool Material on which tool marks have been printed

     

    (1) Load the Material

    Procedure

  1. Perform preparations for cutting.
    Perform the procedure at the following link.

(2) Set Tool Mode

Procedure

  1. Press [MENU] several times to display the screen shown in the figure.


  2. Press [] several times to display the screen shown in the figure.

     

  3. Press [].


  4. Press [] to select TOOL MODE.

     

  5. Press [ENTER].