Set Material Size

Procedure

  1. Click Change under Media Size.

  2. Click Get from Machine.

    The cuttable area is displayed.

    If a Message Saying "The machine is not responding." Is Displayed

    Refer to "The Machine Doesn't Run," and check the machine and computer settings.

  3. Click OK.

  4. Click OK in the Cut Setting window.

    The cutting area is set.

    The white area is the cutting area. Characters and shapes outside this area will not be cut.

     


    		 *1: Cutting area
    *2: The origin set in "Setting the Origin" (the cutting start position) corresponds to the lower-left corner of the screen in CutStudio.