Referring to the Menu Flow Chart as you proceed will help the setting procedure go smoothly.

(1) Select Manual Mode

Procedure

  1. Press several times to display the screen shown in the figure.



  2. Press several times to display the screen shown in the figure.

  3. Press .


  4. Press to select MANUAL.

  5. Press .

  6. Press twice.

(2) Enter the Distance between the Crop Marks

Enter the values that you made a note of in Step 1, No. 3.

Procedure

  1. Press to display the screen shown in the figure.

     

  2. Press to enter the distance (width) between the crop marks


  3. Press to confirm.

  4. Press .

  5. Press to enter the distance (length) between the cutting position origin and the printing position origin.

  6. Press to confirm.

  1.  

    (3) Enter the Offset Value

    Procedure

  2. Press .

     

  3. Press to enter the distance (width) between the cutting position origin and the printing position origin.

    In most cases enter 0 mm.

  4. Press to confirm.

  5. Press .

  6. Press to enter the distance (length) between the cutting position origin and the printing position origin.

    In most cases enter 0 mm.


  7. Press to confirm.